SWR Workingman's Bass Stack 
From the Manufacturer:
The precision electronic section featured in the Workingman's Series of amplifiers is entirely hand-built,
employing a variety of technologies selected for their sound quality and practical usefulness in a roadworthy and studio-ready amplifier, including an all-discrete initial gain stage in the preamplifier section and discrete solid-state design in the power amplifier. Regardless of its lower price, the Workingman's Series offers no compromises of the essential SWR design and construction philosophy. Corners are not cut from a more elaborate model: rather, each product's design parameters are conceived from the ground up and the best available components are selected for each application. Once again, with sound, reliability and price consciousness in mind.
The tone-shaping section of all Workingman's Series amplifiers, including the Aural Enhancer (found in
all SWR Preamps and Integrated Amplifiers) and the Tone Controls, will not impose a character on your
sound. They will instead make the interface between your instrument and the speaker system (two of
the largest factors in your final tone) a simple matter requiring minimal effort. The center frequencies of
the Tone Controls were chosen for their musical effect on most basses.
SWR amplification is handmade and individually tested in the United States. Everyone at SWR sincerely
hopes that you are satisfied with your recent purchase, as we are extremely proud of the quality and
attention that goes into each and every SWR product. We truly hope that your purchase of an SWR helps
bring out the best in your playing and adds to your enjoyment of music.
WORKINGMAN'S 4004 - POWER SPECIFICATIONS
400 watts @ 4 ohms
260 watts @ 8 ohms
Minimum Impedance: 4 ohms
WORKINGMAN'S 4004 - RACK CASE ENCLOSURE
The Workingman's 4004 comes enclosed in a sturdy, custom fitted rack, covered in midnight blue carpet
with stack lock corners. The rack case was designed specifically to house the Workingman's 4004 chassis
and features a single open rack space (directly below the amplifier) for mounting the effect unit of
your choice. Most single rack space effect units or digital tuners on the market today will mount perfectly
into this space.
Dimensions: 23.5" W x 7.5" H x 13.5" D
Weight: 24 lbs.
DOWNLOAD Owner's Manual & Product Specs
|
